Kategorije

Elektricni klaviri i oprema
Kablovi,konektori i adapteri

Brendovi

Audio-Technica BP893cLM3

Terminisan za Sennheiser wireless sisteme

305.00

With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893 MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios.

The BP893 MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin.

Outstanding clarity and intelligibility

 

Lightweight, ergonomic design

 

Extremely unobtrusive, 1-inch flexible boom

 

Secure over-the-ear placement

 

Extended frequency response for natural vocal reproduction

 

Locking 4-pin microphone output connector compatible with included power module and all Audio-Technica UniPak® body-pack wireless transmitters

 

UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality

 

  • Available in black and beige, wired and wireless models:
    BP893 – includes AT8539 power module
    BP893-TH – same as BP893, but in “theater” color (beige)
    BP893c – less power module; 55″ (1.4 m) cable, unterminated
    BP893c-TH – same as BP893c, but in “theater” color (beige)
    BP893cH – less power module; 55″ (1.4 m) cable terminated with a screw-down 4-pin connector for use with Audio-Technica wireless systems featuring cH-style connector
    BP893cH-TH – same as BP893cH, but in “theater” color (beige)
    BP893cW – less power module; 55″ (1.4 m) cable terminated with a locking 4-pin connector for use with Audio-Technica wireless systems featuring cW-style connector
    BP893cW-TH – same as BP893cW, but in “theater” color (beige)
    BP893cL4 – less power module; 55″ (1.4 m) cable terminated for Sennheiser wireless systems using Lemo connector
    BP893cL4-TH – same as BP893cL4, but in “theater” color (beige)
    BP893cLM3 – less power module; 55″ (1.4 m) cable terminated for Sennheiser wireless systems using locking 3.5 mm connector
    BP893cLM3-TH – same as BP893cLM3, but in “theater” color (beige)
    BP893cT4 – less power module; 55″ (1.4 m) cable terminated with TA4F-type connector for Shure wireless systems
    BP893cT4-TH – same as BP893cT4, but in “theater” color (beige)
    BP893cT5 – less power module; 55″ (1.4 m) cable terminated with TA5F-type connector for Lectrosonics wireless systems
    BP893cT5-TH – same as BP893cT5, but in “theater” color (beige)

 

SPECIFICATIONS

Element

Fixed-charge back plate, permanently polarized condenser

Polar Pattern

Omnidirectional

Frequency response

20-20,000 Hz

Low frequency roll-off

80 Hz, 18 dB/octave (wired only)

Open circuit sensitivity

–34 dB (19.9 mV) re 1V at 1 Pa

Impedance

245 ohms (wired only)

Maximum input sound level

114 dB SPL, 1 kHz at 3% T.H.D.

Dynamic range (typical)

88 dB, 1 kHz at Max SPL (wired only)

SIGNAL-TO-NOISE RATIO

68 dB, 1 kHz at 1 Pa

Phantom power requirements

11-52V DC, 2 mA typical

Switch

Flat, roll-off (wired only)

Current consumption

0.1 mA typical at 5V (wireless only)

Voltage range

2.5-11V (wireless only)

Weight (microphone)

Microphone, boom & earpiece: 2.0 g (0.07 oz)

Weight (power module)

85 g (3.0 oz)
(wired only)

Dimensions

Microphone: 8.1 mm (0.32″) long, 2.6 mm (0.10″) diameter
Boom: 26.4 mm (1.04″) long, 1.07 mm (0.04″) diameter

Dimensions (power module)

97.6 mm (3.84″) long, 18.9 mm (0.74″) diameter
(wired only)

Output connector (power module)

Integral 3-pin XLRM-type

Cable

1.4 m (55″) long (permanently attached to microphone), 1.6 mm (0.06″) diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)

Accessories furnished

BP892: AT8539 power module (wired only); AT8464 dual-ear microphone mount; AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; belt clip (wired only); carrying case
BP892-TH: AT8539 power module (wired only); AT8464-TH dual-ear microphone mount; AT8440 cable clip; two AT8157-TH windscreens; two AT8156-TH element covers; moisture guard; belt clip (wired only); carrying case

Audio-Technica case style

M31