Kategorije

Elektricni klaviri i oprema
Kablovi,konektori i adapteri

Brendovi

Audio-Technica ATM450

Condenser Cardioid Instrument Microphone

250.00

One of the new stars of the Artist Series remake, the ATM450 cardioid condenser offers an innovative side-address stick design for endless placement options and minimal obstructions. The microphone is equipped with an integral 80 Hz hi-pass filter that provides easy switching from a flat frequency response to a low-end roll-off. The ATM450 also features a switchable 10 dB pad that lowers the microphone’s sensitivity, providing higher SPL capability for flexible use with a wide range of performers and system configurations. The microphone’s extended flat frequency response makes it ideal for high SPLs as well as for live and amplified acoustic instruments. Includes a professional isolation clamp to provide secure mounting, versatile positioning and effective dampening of unwanted mechanical noise.

Unique side-address stick design maximizes placement options with minimal obstructions

Uncompromising sound quality for overheads, percussion, acoustic guitar, strings and other acoustic instruments

Integral 80 Hz HPF switch and 10 dB pad

Durable performance for professional applications

Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

Rugged, all-metal design and construction for years of trouble-free use

Includes isolation clamp for shock protection, secure mounting and easy positioning

Product guaranteed for 15 years

Element

Fixed-charge back plate, permanently polarized condenser

Polar Pattern

Cardioid

Frequency Response

40 – 20,000 Hz

Open Circuit Sensitivity

-41 dB (8.9 mV) re 1V at 1 Pa

Impedance

200 ohms

Maximum Input Sound Level

152 dB SPL, 1 kHz at 1% T.H.D.
162 dB SPL, with 10 dB pad (nominal)

Low Frequency Roll Off

80 Hz, 12 dB/octave

Switches

Flat, roll-off; 10 dB pad

Dynamic Range

127 dB, 1 kHz at Max SPL

Signal-to-Noise Ratio

69 dB, 1 kHz at 1 Pa

Phantom Power Requirements

11-52V DC, 3.5 mA typical

Weight

98 g

Dimensions

126.9 mm (5.00″) long, 21.0 mm (0.83″) diameter

Output Connector

Integral 3-pin XLRM-type

Accessories Included

AT8471 isolation clamp for 5/8″-27 threaded stands; 5/8″-27 to 3/8″-16 threaded adapter; windscreen; soft protective pouch