Kategorije

Elektricni klaviri i oprema
Kablovi,konektori i adapteri

Brendovi

Audio-Technica AE3300

Cardioid Condenser Vocal Microphone

380.00

With pristine audio quality, ultra-low handling noise, and high-frequency clarity, Audio-Technica’s AE3300 gives voice to the subtleties of vocal performance. This cardioid condenser vocal microphone features the condenser element used in the legendary AT4033 and proven in the world’s finest recording studios. The hardened-steel outer grille is lined with fine steel mesh and a layer of open-cell foam for ultimate protection against vocal plosives without compromising high-frequency clarity. Its superior anti-shock engineering ensures low handling noise and quiet performance. For exceptional performance. For exacting detail. For brilliant clarity: AE3300. It’s the new standard in live audio.

Exceptional performance for exceptional performers

Same element as the classic AT4033 studio microphone

Well-tempered polar pattern with outstanding rejection qualities

Superior anti-shock engineering ensures low handling noise and quiet performance

High-quality double-sided PCB uses surface-mount components. Extensive grounding plane and attention to best-practice grounding methods minimize electrical noise

Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity

Robust all-metal design for enduring dependability on the road

Quiet-Flex™ stand clamp provides silent, flexible microphone positioning

Integral 80 Hz HPF switch and 10 dB pad

Element

Fixed-charge back plate permanently polarized condenser

Polar pattern

Cardioid

Frequency response

30-18,000 Hz

Low frequency roll-off

80 Hz, 12 dB/octave

Open circuit sensitivity

-42 dB (7.9 mV) re 1V at 1 Pa

Impedance

150 ohms

Maximum input sound level

147 dB SPL, 1 kHz at 1% T.H.D.;
157 dB SPL, with 10 dB pad (nominal)

Noise

19 dB SPL

Dynamic range (typical)

128 dB, 1 kHz at Max SPL

Signal-to-noise ratio

75 dB, 1 kHz at 1 Pa
a

Phantom power requirements

11-52V DC, 3 mA typical

Switches

High-pass filter;
10 dB pad (nominal)

Weight

10.6 oz (300 g)

Dimensions

7.05″ (179.0 mm) long,
1.97″ (50.0 mm) head diameter,
1.30″ to 0.87″ (33.0 mm to 22.0 mm) tapered body diameter

Output connector

Integral 3-pin XLRM-type

Accessories furnished

AT8470 Quiet-Flex™ stand clamp for 5/8″-27 threaded stands; 5/8″-27 to 3/8″-16 threaded adapter; soft protective pouch

Audio-Technica case style

T4