Kategorije

Elektricni klaviri i oprema
Kablovi,konektori i adapteri

Brendovi

Audio-Technica AE2500

Dual Element Instrument Microphone

710.00

The ultimate kick drum mic, Artist Elite AE2500 dual element microphone features both condenser and dynamic capsules in a perfect phase relationship, all in one housing. With a provided splitter cable, the separate elements can be control on different channels with their own 3 pin XLR connectors, allowing for a precise sound balance. The AE2500 is presented in a rugged durable casing, and is provided with a stand clamp offering shock protection, secure mounting and easy positioning. The AE2500 is equally at home on the road and in the studio.

Revolutionary dual-element design

The flexibility of two microphones in one shell

Dynamic element for attack, condenser element for tonality

Perfect phase relationship element positioning, practically unachievable with two mics

Two layers of resistive mesh for precise control over the sound reaching the diaphragms

Rugged and durable design for enduring dependability on the road

Isolation clamp for shock protection, secure mounting and easy positioning

Includes 5m cable (5 pin XLR to 2 x 3 pin XLR) for separate control of each element

Element

Condenser, dynamic

Polar Pattern

Cardioid

Frequency Response

20 – 17,000 Hz (condenser)
30 – 10,000 Hz (dynamic)

Open Circuit Sensitivity

-51 dB (2.8 mV) re 1V at 1 Pa (condenser)
-54 dB (1.9 mV) re 1V at 1 Pa (dynamic)

Impedance

100 ohms (condenser)
600 ohms (dynamic)

Maximum Input Sound Level

148 dB SPL, 1 kHz at 1% T.H.D. (condenser);
158 dB SPL, with 10 dB pad (nominal)

Low Frequency Roll Off

80 Hz, 12 dB/octave (condenser)

Dynamic Range

124 dB, 1 kHz at Max SPL (condenser)

Signal-to-Noise Ratio

70 dB, 1 kHz at 1 Pa (condenser)

Phantom Power Requirements

11-52V DC, 3 mA typical (condenser)

Weight

390g

Dimensions

6.50″ (165.0 mm) long, 2.17″ (55.0 mm) maximum diameter

Output Connector

Integral 5-pin XLRM-type

Cable

16.5′ (5 m) dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors

Accessories Included

AT8471 isolation clamp for 5/8″-27 threaded stands; 5/8″-27 to 3/8″-16 threaded adapter; soft protective pouch